SCB – Waverunner Sport Control Board

£130.00

SCB – Sport Control Board

Sport Control Board packed full of extra features

Mode selection switch on SCB allows easy configuration of preset modes.

Compatible with Waverunner Sport (2.4GHz & 5.8GHz) standard Rx modules. (NOTE – Board enclosure not supplied designed to fit in your existing unit without lid as pictured)

When used with Flysky FS-i6x transmitter & FS-iA6B receiver  8 channels are available (NOTE: Our adapter lead is not required as accepts input directly from the Flysky Receiver)

See Downloads/documents section for manual.

Package Contents:

  1. SCB – Sport Control Board
  2. Quick Start Instruction Manual

 

Description

Specifications

Waverunner Sport Control Board 

Compatible with Waverunner Sport (2.4GHz & 5.8GHz) (Lead & Lithium batteries)

Can be fitted through battery compartment

(NOTE – Board enclosure not supplied designed to fit in your existing unit without lid as pictured)

A direct interface is provided to SP Tackle’s Autopilot system to allow easy fitment.

Connector I/O Specifications

PPM Rx Module Input

  1. Flysky – 8 channel operation using FS-iA6B receiver.
  2. Waverunner compatible

DC Power I/P

  1. +12V operation
    1. Reverse voltage protection
    2. Over current protection, 24A trip
  • Compatible with:
    • Lead acid
    • Lithium
    • Nimh (3 – 9 cells)
    • Lipo (2S – 3S)

2 x Brushed motor outputs

  1. /Peak Current – 60A/360A

2 x 2 Amp high current switch outputs for hoppers

    1. With thermal overload protection

1 x 2 Amp switch output for Waverunner Fish Finder DC port

  1. With thermal overload protection

8 x LED outputs

  1. Battery voltage level displayed using two LEDS

 

Additional Features

PPM BCM Autopilot Input

  1. Direct input for use with SP Tackle GPS Autopilot System

2 x PWM Outputs

1 x 0.9 Amp auxiliary universal switch output

  1. With thermal overload protection

 

Warranty:

12 months on SP Tackle SCB